question

sebastia avatar image
sebastia asked

Modbus TCP Active input current limit CERBO GX

I'm trying to remotely change the "Active input current limit" with the Cerbo GX Touch Panel on a 3-Phase-Quattro-system and also with a PLC connected to the Cerbo GX with Modbus TCP using com.victronenergy.vebus Register 22, but non of these remote ways seem to work, the only way to change it at the moment is directly with the VE.Bus system Configuration.

I have configured the AC input Current Limit box to "Overruled by remote" as it says on the Cerbo GX Manual.

I would appreciate any king of advice / assistance.

Thank you.

cerbo gxModbus TCPcurrent limit
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
hackerp avatar image
hackerp answered ·

Yeah, also having problems modifying the "writable registers", can only read them. Anybody got the answer? x

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

hackerp avatar image hackerp commented ·

@mvader

0 Likes 0 ·
wkirby avatar image
wkirby answered ·

I have no problems writing to that register, it's working well for me:

1671653878194.png



1671653878194.png (65.0 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.