question

gunzenbomz avatar image
gunzenbomz asked

Victron Lynx Smart BMS 500

Has Victron-energy not considered supporting 3rd party battery makers on its lists via can-bus link. Such as pylontech, so that this could be apart of a lynx bus bar system. Instead of as I am planning having too use the lynx smart shunt.


As the lynx smart bms can be firmware updated but not the other!

lynx shuntlynx bms
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
gunzenbomz avatar image
gunzenbomz answered ·

I have been told by several users off of facebook that they use a victron shunt combined with pylontech batteries. I know that isn't necessarily needed but its nice to have super accurate info. And also from y/t explorist life he did comparison graph.


Second line from bottom of graph shows '3rd party CAN BUS' ticking the LYNX SHUNT alone & with Cerbo GX + touch gx

shunts-1.jpg






shunts-1.jpg (226.7 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

LED indications, warnings, alarm and error codes

Lynx Smart BMS product page

Lynx Smart BMS online manual

Additional resources still need to be added for this topic

Additional resources still need to be added for this topic