question

camper33 avatar image
camper33 asked

VE.Direct Arduino

I just spent a few hours to make my Bluesolar talk to am Arduino… Right now it does, for one exception: I don’t get enything back from the variable “LOAD”

The variables (V;PPV;H20;H21) I can read and see it on the Display.
in the Victron White-paper the description for ”LOAD“ is not very accurate. Just (on / off) is this cleartext “on” or is ON= “0“ and OFF= ”1”???

all other variable ar clearly described what to expect.

Using the App, I can switch the load on and off

Hardware:

- Bluesolar 75|15 firmware v1.59

- Arduino Nano OLED Display


any Idea?


Thanks for Help Andreas



MPPT ControllersVE.Directarduino
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Lars Filusch avatar image
Lars Filusch answered ·
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

camper33 avatar image
camper33 answered ·

i just looked at this. But I do still not know what I do expect to get return from LOAD. “0” / ”1” or ”off”/ ”on”

Andreas

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

VE.Direct protocol FAQ

Additional resources still need to be added for this topic

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual