question

leif avatar image

Issues when connect VE.bus-NMEA 2000 interface to Phoenix inverters 24/5000

3 fas system with Phoenix 24/5000 inverters without any remote panels, system works perfekt.

All tree inverters shut down when connect VE.bus-NMEA 2000 interface, this happen with/without connection to NMEA2000 network.

Serienummer och software
Inverter L1, S/N:HQ1823JP75V $7A02738C S/W:2614413
Inverter L2, S/N:HQ1823KUQPI $7A0281CD S/W:2614413
Inverter L3, S/N:HQ1823F8F42 $7A02817A S/W:2614413

Interface: S/W:2.19

Phoenix InverterVE.Bus
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
leif avatar image
leif answered ·

That shall be done, even if there is no notis about this problem in "firmware changelog"

There is a problem to get access to this commercial ferry running 24/7, so it would be great to have some more actions to do if it not work with update.

Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Paul B avatar image
Paul B answered ·

First of all I would upgrade all the firmwares to the Latest versions SW2614433 then see if you still have the issue

https://professional.victronenergy.com/downloads/firmware

Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.