Is it possible to connect 2 or more Phoenix Smart IP43 Chargers to a single battery bank to charge a large lithium battery bank?
Is it possible to connect 2 or more Phoenix Smart IP43 Chargers to a single battery bank to charge a large lithium battery bank?
Hi @Graham Perry,
yes that's possible. But take in mind that they don't talk to each other. Each PSC is on its own and have no idea what the others are doing.
If your system includes a SmartShunt or BMV-712, you can setup VE.Networking and let the PSC's join the same network so they all will get the same voltage information from the shunt.
Graham - Phoenix Smart IP43 120-240V Chargers according to Victron Manual DO work as one on a network- see Link-
Synchronised charging capability enables multiple compatible chargers to be combined together in a common VE.Smart network, allowing the chargers to operate in unison as if they were ONE Large Charger!
However the Phoenix Smart IP43 230V Model does not (at least its not in the manual) so it depends what model you have, i have the 120-240V Model in which i have 4 in parallel and they do appear to sync charge steps just fine.
Additional resources still need to be added for this topic
28 People are following this question.