question

lori-larson avatar image
lori-larson asked

Bad link in VictronConnect manual

I am looking for details on the battery settings in the VictronConnect app. Section 5 in the manual states "For a full explanation of the Solar Charge Controller options, follow this link" The link is below and I get 404 File not found. Can someone point me to the info please?

https://www.victronenergy.com/media/pg/MPPT_Solar_Charge_Controllers/en/index-en.html

VictronConnect
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·
2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

lori-larson avatar image lori-larson commented ·
That's what I needed, thank you!
0 Likes 0 ·
mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ lori-larson commented ·
And we’ll fix the link! Thanks
0 Likes 0 ·
Nicolas Trejahn avatar image
Nicolas Trejahn answered ·

Your link is still bad / bad again (as of May, 2024).

In addition I get the same with the Victron Connect app and SmartSolar MPPT 100|20 and 75|15 and Settings - Battery - Expert mode - Absorption duration - Link "See manual for details". Clicking produces:

https://www.victronenergy.com/media/pg/MPPT_Solar_Charge_Controllers/en/index-en.html?utm_source=offline&utm_medium=qr&utm_campaign=qr%20code%20products

and the following error message:

Oops. The page you're trying to reach does not exist. Go back to victronenergy.com or contact us about a problem

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources