question

skaterudo avatar image
skaterudo asked

Cerbo GX and Phonix Inverter via Modbus TCP ID226 not responding

We try to read datas from the inverter (connected on VE.Direct1). Cerbo show ID 226:

1636993282829.png


But when I try to read data from the inverter (see below) via Modbus

ID: 226
Adr: 3
Anzahl:3

1636993413287.png

I always get this message, not datas will received?

1636993463454.png

But when I read via ID100 from the bus (e.g. parameter 840) I receive the actual DV voltage form the inverter.

What could maybe the reason for ID 226 not working?

Thanks in advance

P.S. We updated the Cerbo GX with the latest version before we started.


cerbo gxModbus TCP
1636993282829.png (26.4 KiB)
1636993413287.png (8.9 KiB)
1636993463454.png (23.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
selenakale avatar image
selenakale answered ·

Looking forward to you sharing more information, I have been looking for it for days.

mapquest directions

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

skaterudo avatar image
skaterudo answered ·

Hi,

what further informations are you looking for?

Tnx

Skaterudo

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

lindajobs avatar image
lindajobs answered ·

I'm hoping you'll provide additional information because I've been hunting for it for days.

drift hunters

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.