question

twistedtree avatar image
twistedtree asked

Using Venus device to access VE.bus with VE Configure?

If I have a couple of Quattros and a Venus device all connected via ve.bus, can I use the Venus device at the gateway to ve.bus for VE Configure? Or do I need to buy a dedicated USB to VE.bus adapter? Or perhaps VE Connect can do everything VE Configure can do, and I should use that?

Venus GX - VGXVEConfigure 3
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

VE.Connect cannot do VE.Bus devices just yet.
You cannot use VE.Configure through a Venus device - directly.

You CAN use Remote VE.Configure via your VRM site.

https://www.victronenergy.com/live/vrm_portal:remote-veconfigure


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Venus GX manual

Venus GX product page

Additional resources still need to be added for this topic