question

campsite avatar image
campsite asked

Console ve.direct connection check

Hi everyone,

I am running VenusOS and have multiple devices connected via USB->VE.direct as well as USB->VE.bus.

When i disconnect a VE.direct or bus device on the serial side, VenusOS shows it as 'Not connected'
Does anyone know if i can do the same check through the CLI?

Venus OSRaspberry PiVE.Busmk3-usb
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
outsourcedguru avatar image
outsourcedguru answered ·

I'm relatively sure that one could use the dbus command to query things. Docs ...and this appears to be a bigger manual.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron Venus OS Open Source intro page

Venus OS GitHub (please do not post to this)

Additional resources still need to be added for this topic

Raspberry Pi running Victron’s Venus firmware - Blog Post

Venus OS Large image: Signal K and Node-RED - Install

raspberrypi install venus image


Additional resources still need to be added for this topic

What is VE.Bus?