I have 10x MPPT connected through USB hub, in the VRM I see just the total of the generated power from the first 4
The sum doesn't include the rest of the units. Any hints?
Check pictures attached
I have 10x MPPT connected through USB hub, in the VRM I see just the total of the generated power from the first 4
The sum doesn't include the rest of the units. Any hints?
Check pictures attached
Victron have always recommended a quality, powered usb hub. 'Inadequate' devices are available aplenty and can give issues like this. Big price differences in the market, but this isn't a bank of phone chargers, it's all-out data. Your 'Last Seen' messages also suggest long term data breaks.
You didn't answer the question about GX type, but there are some that would gag on a data load like that. Often accompanied by Wait or Busy messages. But anyways might benefit from a firmware update if you haven't done so already. A reboot of the GX often helps if something's corrupted.
The usb hub seems the most likely offender to me..
Hi, it's a cerbo GX, everything was working fine before, have latest firmware and tried rebooting without success...
Which USB hub would you recommend?
170 People are following this question.