question

Tobias Franklin avatar image
Tobias Franklin asked

Zigbee connection broke after firmware upgrade v3.30~15->v3.30

For the last 2 years I've just updated the Cerbo GX no worries at all - this time the update to v3.30 fully broke the Zigbee connection which removed my ET112 meter from the picture forcing my setup into Passthru mode.

So seems I am stuck on this beta version?

Seems odd that the release version would break this when this late beta was working fine.

Any ideas as to what I should do? (I was able to roll back and the zigbees reconnected straight away).

firmware updateEnergy Meter
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Tobias Franklin avatar image
Tobias Franklin answered ·

I noticed that firmware v3.40~1 was available, updated to it, and that resolved my issues. Note that to get this latest release, you have to have enabled beta releases.

On update, the cerbo gx physical screen failed to display even after x2 reboots, but disconnecting the hdmi plug and replacing it while the cerbo gx was on seemed to fix that.

1711530645757.png1711530631692.png


1711530631692.png (23.7 KiB)
1711530645757.png (22.2 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.