Using the Relay of Cerbo GX

Question

question

goon326 asked Feb 25, '24

Hello, I have a question about the relay of the Cerbo GX.

Can I use the relay to switch when I put in shore power? So that I can make a light which will go on when I plug shore power in?

Thanks!

cerbo gx Relay

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2024-02-25T23:47:52Z

matt1309 answered · Feb 25 at 11:47 PM

I'm not sure if you can do this with VeConfigure assistants however take a look at node red.

I dont have cerbo so cant confirm but i can control my mppt relay from there.

I can also see grid status in node red. So could in theory make what you're looking for work.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.