question

gernot-lepuschitz avatar image
gernot-lepuschitz asked

Phoenix 12/350 old style inverter - remote on/off

I have an old style phoenix inverter 12 / 350 (see pictures). For newer models, the manual says that it can be remotely turned on by supplying 12v to the left pin of the remot panel. Is this also true for the older models? Or do I need a switch to connect left and right pin to remotely turn the inverter on? The manual for my model does not tell anything about it.


victron-inverter1.jpegvictron-inverter2.jpeg

Phoenix Inverter
victron-inverter1.jpeg (227.0 KiB)
victron-inverter2.jpeg (221.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
klim8skeptic avatar image
klim8skeptic answered ·

@Gernot Lepuschitz you can use a switch connected to the remote port as a on / off switch.

Or you could use the inverting adaptor lead to switch the inverter on with a positive input signal.

phoenix-350.png



phoenix-350.png (248.3 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

gernot-lepuschitz avatar image
gernot-lepuschitz answered ·

Many thanks for the quick response. I will use a switch to turn it on/off in that case.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.