question

gr4nola avatar image
gr4nola asked

Phoenix Inverter Compatible with Color Control GX?

I have a Phoenix 1200VA inverter connected via VE. Direct cable to my Color Control GX but I'm not getting any live info on the Home Screen. It's showing as "Off". If I hit Menu on the Controller I can see the Inverter listed as a device and that it is in fact connected and Inverting. My firmware version is v1.21

Does anyone know if the Phoenix Inverter is compatible with the Color Control GX and able to give live info on the home screen?

CCGX Color ControlPhoenix Inverter
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Rob Duthie avatar image
Rob Duthie answered ·

Hi

Yes it is, it should show all the data required, i use a phoenix 250/12 and all the data is there.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kurtinge avatar image
kurtinge answered ·

It will give information, but it will be very inaccurate. At least my 12/375 is very inaccurate. Putting ex 60w load, but this is presented as 0w.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.