question

John2019 avatar image

Quattro alarm value

Hi every one.

When I connect a quattro to CCGX and set alarms. There are some alarms like low battery , high temperature ,inverter overload ,high DC ripple ....... Just wonder what is the default value of those guys, for example what is the high DC ripple value (???V) or high temperature (????Degree) and Where can I reset them??


Thanks

MultiPlus Quattro Inverter ChargerCCGX Color Control
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image

you reset them under notifications in the CCGX Screen

DC ripple usually means that you DC cables are TWO long or two small and you are having voltage drop under hi load conditions


DC Ripple of more than 1 volt, is BAD news for Inverters as it puts a heavy load on the Inverters Capacitors and ages them. please read up about it on the below link

https://www.victronenergy.com/live/_media/ve.bus:4._ripple_in_a_ac_battery_system.pdf

Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.