Need information about PGN 127750, Converter (Inverter/Charger) Status

Question

question

urbansk asked Feb 17, '19

I am building a ve.direct/N2k interface for my Bluesolar MPPT 75/10 and hopefully have the information displayed on my MFD.

The Bluesolar with ve.can interface are supposed to transmit this PGN but detailed information is missing in all Victron documents I can find.

This is what I know from NMEA.org

127750 Converter (Inverter/Charger) Status

Field # Field Description

Provides both state and status information about a Charger, Inverter or combined Inverter / Charger.

1 Sequence ID

2 Connection Number

3 Operating State

4 Temperature State

5 Overload State

6 Low DC Voltage State

7 Ripple State

8 NMEA Reserved

What I am missing is data types for each field and what data to expect.

Regards,

Urban

MPPT Controllers VE.Direct VE.Can NMEA 2000 - N2K

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2019-02-17T09:22:17Z

mvader (Victron Energy) answered · Feb 17, 2019 at 09:22 AM

Hi Urban, those details are under NDA by the NMEA organisation; so can only be purchased from them; sorry.

Perhaps good to know that we are working to add transmission of NMEA2000 PGNs, including solar, to our Venus-device range.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.