question

johandeklerk avatar image
johandeklerk asked

External control on a MPPT

Hi, would it be possible to see what is the external control on a MPPTmulti-state1.png

ESS
multi-state1.png (68.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
wkirby avatar image
wkirby answered ·

When the MPPT is under External Control, then it follows the VE.Bus device (MultiPlus or Quattro).
So, in this case the MPPT is in Float as shown below the VE.Bus device symbol in the middle.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

smarthomeblue avatar image
smarthomeblue answered ·

ich habe das gleiche Problem , wie kann man es beseitigen?


3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·
Ein paar Infos zum System würden vielleicht helfen die Ursache bzw. eine Lösung zu finden.
0 Likes 0 ·
smarthomeblue avatar image smarthomeblue Matthias Lange - DE ♦ commented ·

Hallo Matthias,

das gleiche wie auf dem Foto des Erstellers, PV Charger im Modus Ext. Control. Nicht wurde geändert.


1625596453163.png

0 Likes 0 ·
1625596453163.png (22.6 KiB)
smarthomeblue avatar image smarthomeblue Matthias Lange - DE ♦ commented ·

2x Multiplus 3000
2x SmartSolar MPPT VE.Can 150/70
2x PYLONTECH LiFePO4 Speicher 48V - 3,5 kWh - US3000 C
Cerbo GX
Alle Geräte sind online.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic