question

keithr avatar image
keithr asked

How to configure MultiPlus II 48/5000 for use as UPS with US3000 Pylontech

The intention is to run the system as Back-up UPS due to local load shedding, until the PV can be installed later.

1 x Multiplus 2 48/5000 + 15kW PylonTech US3000

Tried setting it up using ESS with function "Keep Batteries Charged" but, when grid is lost, it does not power the load.

How can this be configured ??

Please help

Multiplus-II
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·

@KeithR

By when grid is lost it does not power load, do you mean the multi switches off? Or does it remain on but you are losing power on the output? Or is there a momentary drop in power causing everything to go off?

0 Likes 0 ·
1 Answer
lucode avatar image
lucode answered ·
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic