question

liopleuredon avatar image

Cerbo GX dead after update to 2.60

Hello,

I am reading here already for a long time but now my first question.

I have a new Cerbo GX since yesterday,everything was ok but after the update to 2.60 nothing works.

I have no access any more,the wifi led is orange,sometimes blinking or off or steady ?

The bluetooth led never lights any more.

I tried the reset button,and try to connect by cable to my router nothing helps.

Any ideas ?

Regards Eric

Firmware Update Issuecerbo
2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

@liopleuredon

I guess you have a very rare known bug.
Unless you are a Linux expert the only thing you can do is to contact you dealer for an exchange.

https://community.victronenergy.com/questions/66811/cerbo-not-booting-flashing-orange-light.html

2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

liopleuredon avatar image
liopleuredon answered ·

@Matthias Lange - DE Thank you,(danke) i sended an email to my dealer with a link to this thread,lets see what happens.

2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.