question

n-dee avatar image
n-dee asked

VE-can MPPT not being recognised properly

Hi anybody else with problems with MPPTs connected throug LAN?

Often my cerbo doesnt rekognize them and reports missing devices, today it shows one of the MPPTS (OST) corrupted as two devices named 0 8 WST (-> See screenshot)
I was wondering why we are producing so much energy :-)

MPPT SmartSolarVE.Can
mppt.jpg (35.3 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @N-DEE

is it possible it is connected with ve.direct cable also?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

n-dee avatar image
n-dee answered ·

no, only with lan.

altough they were new, I switched lan cables.

changed the names so that there are no german special characters.

now one of them doesn't report its name into vrm


name.png (7.4 KiB)
2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

n-dee avatar image n-dee commented ·

Interesting that it doesn't show detail infos either...

0 Likes 0 ·
mppt.png (18.5 KiB)

Ok, what is the VRM-id of the system? I can have it looked at for you.

0 Likes 0 ·

Related Resources

MPPT product page

VictronConnect manual

PWM or MPPT

MPPT calculator

MPPT codes

Additional resources still need to be added for this topic