question

jon-lowbank avatar image
jon-lowbank asked

Installing new Quattro with old Blue Power Panel VVC Ver.0x0400


I've replaced a faulty 3kw Quattro in an existing setup with a VE.Net Blue Power Panel VVC Ver.0x0400

The panel still shows the connection But "Initialising" forever and will not connect.

I read that to up date the BPP is hard.

Can I downgrade the Quattro Firmware? if so what to?

I'm not using a assistants

Thanks


blue power panel
img-20200821-150258098.jpg (437.6 KiB)
img-20200821-145940727.jpg (767.7 KiB)
img-20200821-145948775.jpg (375.0 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Martijn Coster (Victron Energy Staff) avatar image
Martijn Coster (Victron Energy Staff) answered ·

@Jon_Lowbank Yes you can downgrade the firmware to v2634159
If you have access to: https://professional.victronenergy.com/downloads/firmware/

You can download it there. You can make an account if needed.
you will need an MK3 and VEFlash to program the firmware into the unit.
You can download VEConfigure that includes VEFlash here:
https://www.victronenergy.com/support-and-downloads/software

https://www.victronenergy.com/Executables/VEConfig/VECSetup_B.exe

best regards

Martijn Coster
Victron Energy

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jon-lowbank avatar image jon-lowbank commented ·

Thanks for the info on the Firmware. Do I really need a MK3 ? I have used VEFlash with my MK2 in the Past.

0 Likes 0 ·
Martijn Coster (Victron Energy Staff) avatar image Martijn Coster (Victron Energy Staff) ♦♦ jon-lowbank commented ·

MK2 is also good ofcourse

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic