question

simonwernick avatar image
simonwernick asked

wiring in a starter battery

I am new to this chatroom. I have a Phoenix Multi 12/2500/120 in my narrowboat. two questions:-

How is the multi different to the multiplus?

I want to add a separate cable for charging the engine starter battery. What cable should I use? The manual suggests 70mm for the main bank but does not say for this smaller circuit.

battery charging
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
wkirby avatar image
wkirby answered ·

The MultiPlus variant has the capability to do Power Assist.

The starter battery charge current is up to 4A. If your cable run to the start battery is less than 5 meters than a 1.5mm² cable should be fine. Fit a 5A fuse in line with this run.
A longer cable run would need thicker cable to mitigate Voltage drop.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image
klim8skeptic answered ·

G'Day.

You might be looking for the Phoenix Multiplus manual.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.