question

tug avatar image
tug asked

What do two flashing leds on the digital multi control indicated, after programing, the absorption and float lights flash.

The Digital Multi-Controller, when switched to charger only, shows a blue led, connected to mains, then a blank led for bulk, then flashing yellow for the absorption and float.

Digital Multi Control
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

What settings did you program?
That LED definition that you describe means Temperature sense error. Is the temperature sensor connected correctly?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic