question

beny avatar image
beny asked

Victron GX and SolarEdge HD Wave monitoring

Hi, in document https://www.victronenergy.com/live/venus-os:gx_solaredge it is about setting up in SE converter at 485-1. However, this RS is used for SE metering and battery connection.
Is there anyone who has tried to water this? Why not use 485-2, which can also be set?
I want to upgrade my system and connect SolarEdge and Victron to one monitoring portal, but I have a LG 10H battery.

Venus GX - VGX
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
evhaandel avatar image
evhaandel answered ·

My SolarEdge SE10K has only one RS485 connection, on this connection both the VenusGX and Modbus meter (from SolarEdge) are connected. They work simultaneously on this single connection.

I assume this could also work when connecting the VenusGX to a second RS485 connection but I never tried it.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.