question

Tony avatar image
Tony asked

Is the MK3-USB cable needed to install my new system

I shortly be installing a 8000kva Quattro, 250/100 charge controller, Pylontech batteries and a Venus GX. Do I need the MK3-USB cable to adjust the settings?

Thanks Tony

wiring
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Yes you need a MK3, the default settings are not suitable for the Pylontech batteries.

https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Tony avatar image Tony commented ·

Thank you for your quick response. Tony

0 Likes 0 ·
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi Tony,

For now yes, it is required to have an MK3 to make sure the Quattro is up to date with the latest firmware at the point of installation.

Some of the other settings changes suggested for a Pylontech system (as M.Lange answered) can also be made via Remote VE.Configure via the internet and your GX device without an MK3, though it's probably easier to do it via the MK3 after updating firmware.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Tony avatar image Tony commented ·

Thanks. Will be adding to my order.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic