question

Vidaro avatar image

Multi plus 48/3000/35/16/S/N - Inverter - Change DC input limits - Volt

Its not possible to change

DC input low shot-down to 37 V, and

DC input low restart to restart to 37,5 V.

Can i send the file to Victron to get this done?

Email, website?


Im using two Tesla battery modules Li-ion 6s 24V in series (48V) and the span for these are max 50V and min 30V if im correct.


Thanks for any help!

MultiPlus Quattro Inverter Charger
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nebulight avatar image

I don't think the 48 can go that low. There was recently a firmware update for the Multi that allowed lower settings, but I think that's too low:


https://www.victronenergy.com/blog/2019/07/17/ve-bus-firmware-460-veconfigure-and-venus-os-v2-33/


Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.