question

aurel avatar image
aurel asked

Charging despite SOC treshold

I have a boat system with a Lynx BMS, a couple of Smart Lithium batteries and a Multi Solar RS. The SOC threshold in the BMS settings is set to 70%.

Now, I discharged the battery to 95% and upon connecting to shore power, the Multi RS Solar starts charging the battery to 100% again.

I was expecting that it would not initiate a new charge cycle until the SOC hits 70%. Could someone please explain?

Thank you.

battery chargingSOCMulti RSlynx bms
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@Aurel

What are the settings on the RS exactly ? That is the one deciding to charge or not...

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

aurel avatar image
aurel answered ·

Thank you @alexandra. Ok, I understand that the RS (or probably any charger) will override the BMS setting, that is helpful. I will manage the RS settings next time I am on my boat.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

VictronConnect VE.Bus charging manual  

LED indications, warnings, alarm and error codes

Lynx Smart BMS product page

Lynx Smart BMS online manual

Additional resources still need to be added for this topic

Mutli RS Solar Datasheet

Mutli RS Manual