question

zucca avatar image
zucca asked

What is the changelog of the V510 FW for the Quattros?

Can't find the information online.

For the v507 and v508 there was something available, see below.

https://professional.victronenergy.com/news/detail/225/

I can't decide if it is worth to update or not without the changelog.


Thanks!

vrm firmware update
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@zucca

Unless the below text affects you, then no. And the reason why most cases firmware updates after initial install don't matter.


510

February 29, 2024

Added gridcodes: Czech, Poland

Split the combined G98/G99 gridcode in two separate gridcodes. With G98 being limited to 16A.

Enabled the appendix M. gridcodes of AS/NZS4777 for standard Multis/Quattros.

(installation requires external IP)

PowerAssist is now also available on the 500VA 230Vac products.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nickdb avatar image
nickdb answered ·

On the professional site under the firmware section is a changelog.doc with all the details.


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic