Why, with a charge limit of zero is my Multiplus charging?

Question

question

homestorage-77 asked Apr 9, '24

Why, with a charge limit of zero is my Multiplus charging?

I have the charge and discharge currents set to zero as it's a scheduled charging session, but my voltage is high enough I don't want to charge.

This is confirmed by the ESS#6 & #7 warnings displayed below.

However my system is still charging? Why? What must I set to prevent it charging?

I don't want to mess with the scheduled charging period, the limits are set through the nodered instance running on my Venus GX based on voltage.

Thanks for any support

Multiplus-II Venus GX - VGX scheduled charge

screenshot-2024-04-10-at-000325.png (62.8 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

118 People are following this question.

Modifications Space

Node Red Space

Answer 1 · 2024-04-10T06:54:20Z

prein answered · Apr 10 at 06:54 AM

I don't know, but maybe the 0% SoC has something to do with it?

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2024-04-15T20:33:33Z

homestorage-77 answered · Apr 15 at 08:33 PM

To fix this I just set the switch position to 'off' when the charge current limit is zero during the scheduled charge period, via a function in Nodered

screenshot-2024-04-15-at-213232.png (207.1 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question