question

clupp avatar image

Easy Solar 24/1600: continuously logging ?

Is there any tool/add-on/maker project available to log the KPIs of an Easy Solar 24/1600 continuously for a more detail review of the most critical numbers like PV(A), PV(V), Battery(A), Battery(V),AC1-3 Load?

Thanks!

EasySolar All-in-Onemonitoring
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

The cheapest 'off the shelve' option is to buy a GX device:

https://www.victronenergy.com/panel-systems-remote-monitoring


But you can also make one yourself with a raspberry pi and some cables (MK3 - usb and ve.direct to usb)

on this part of the community forum you can find more information to DIY solutions:

https://community.victronenergy.com/spaces/31/index.html

I personally prefer the Venus GX, as it has lots of inputs and outputs that I use, easy to mount casing, wide input voltage range etc.

Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

clupp avatar image
clupp answered ·

Thanks - I check your recommendations!

Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.