question

done avatar image
done asked

Hooking Up a Digital Multi Control with CCGX and BMV700

I am trying to figure out how to get the ability to control the inverter on a Multiplus from a remote panel. I don't see the option on the Color Control and thought I needed a Digital Multi-Control to do this. The system has the color control and a BVM700 attached to the system. Thoughts on where to hook the Digital Multi-Control?

CCGX Color ControlDigital Multi Control
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Paul B avatar image
Paul B answered ·

In the CCGX Colour Control, Under settings select the Inverter

from the selection list.

you can then select the switch and turn the inverter off or on

or select input current and adjust as required



1566721615430.png (35.4 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

done avatar image
done answered ·

Thanks for answering what turns out to be a simple thing. It was eluding me.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

CCGX Product Manual

CCGX Product page