question

DonE avatar image

Hooking Up a Digital Multi Control with CCGX and BMV700

I am trying to figure out how to get the ability to control the inverter on a Multiplus from a remote panel. I don't see the option on the Color Control and thought I needed a Digital Multi-Control to do this. The system has the color control and a BVM700 attached to the system. Thoughts on where to hook the Digital Multi-Control?

CCGX Color ControlDigital Multi Control
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
DonE avatar image
DonE answered ·

Thanks for answering what turns out to be a simple thing. It was eluding me.

Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Paul B avatar image
Paul B answered ·

In the CCGX Colour Control, Under settings select the Inverter

from the selection list.

you can then select the switch and turn the inverter off or on

or select input current and adjust as required



1566721615430.png (35.4 KiB)
Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.