Hi!
I have succesfully installed Shelly EM from https://github.com/vincegod/dbus-shelly-em-smartmeter and with 2 lines changed I managed to see it in interface but not under Energy Meters.
Anyone had better luck?
Hi!
I have succesfully installed Shelly EM from https://github.com/vincegod/dbus-shelly-em-smartmeter and with 2 lines changed I managed to see it in interface but not under Energy Meters.
Anyone had better luck?
Here are some captions:
I have exactly the same issue, the shelly appears in the device list and updates correctly, but it does not show in Energy Meters, nor does it have the option to set a role in the device itself. I therefore don't believe I can use it with the grid metering in ESS. Has anybody had success with using a shelly (connected on the d-bus) as a energy meter and used in ESS?
I use it in ESS and it works fine
As far as I know only RS485 meters directly connected to the MP will be shown as Energy Meters.
I tried so many github projects and they all worked as grid meters (pv_inverters), but none as energy meters.
Even when using MQTT driver from mr-manuel, or build-in node red in venusos I can make it work bt only as grid meter.
So I am confused when people say energy meter, but they want to say is grid meter.
I mean, I was never able to get values from the grid (left box in graphics..."Not available"):
So If this can be achieved (have energy meter being seen in left box and be used with ESS), please give more details.
The OP says it just changed 2 lines?
How?
Vincegod github says:
com.victronenergy.pvinverter.http_{DeviceInstanceID_from_config}
pv inverter is not the same as energy meter.
Can someone share some lights?
Regards
G.
94 People are following this question.