question

Jonny Sollid avatar image
Jonny Sollid asked

Wrong name in the device list, Multiplus II 230V

I have a 230V multiplus II and it has firmware 2605xxx which is correct for 230V multi, but the menu on Crebo shows a 120V model. Has the wrong name been registered in the firmware? (see attached picture)

skjermbilde-2023-03-19-kl-092806.png

Multiplus-IIfirmware update
skjermbilde-2023-03-19-kl-092806.png (90.2 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

@Jonny Sollid

In this case, 120 does not mean 120 V, but 120 A (the maximum charging current of this model). This is part of the model name.

Please see also the datasheet.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Jonny Sollid avatar image Jonny Sollid commented ·

Of course! Thanks for reply.

0 Likes 0 ·