question

ningaloo avatar image
ningaloo asked

VE.Smart Networking option not showing in Victron Connect settings

I have a Smartshunt and two Smartsolar devices which should be connected using VE.Smart networking, however this option is no longer showing under the settings for the device.
I am accessing the devices remotely via VRM and all other settings show including those that are read-only when accessed remotely.

MPPT SmartSolarSmartShuntVE.Smart Network
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Setting up the smart network is only possible locally via Bluetooth. But if I remember correctly the smart network is not needed anymore if all devices are connected to a GX device.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources


Additional resources still need to be added for this topic

VE.Smart Networking Manual


SmartShunt Product Page

SmartShunt Installation Manual

SmartShunt Quick Installation Guide

SmartShunt Datasheet

Additional resources still need to be added for this topic