John Muntanga avatar image
John Muntanga asked

Incorrect energy flows on the BMV-712 after updating to Firmware version 4.12

After updating to V4.12, the BMV-712 is constantly showing that the battery is discharging even when I have more solar energy (indicated by the MPPT - Please note that I added an MPPT on the same day that I updated the BMV-712 firmware. Note that all cables have been confirmed to be okay without any reverse polarity). Note that my loads are never above 800 watts. Therefore, the battery has now been discharing and its now at 3% SOC. I have a Cerbo GX device with firmware version 2.92, MPPT 150/45 with firmware version 1.61. Im using a non victron Inverter.


BMV Battery Monitorbmv power consumption
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

Victron BMV battery monitors product page

Additional resources still need to be added for this topic