question

Todd Wackford avatar image
Todd Wackford asked

Multiplus - Is there a way to command AC 2 out to on while on Battery

I understand that out of the box multiplus only provides power to AC out 2 when AC in 1 sees AC in. I would like to override that to provide power on AC out 2 even when on battery under a certain condition.

I'd like to use AC 2 out to power water heater when solar yield is greater than a certain amount. I have an RPi running venus OS and thought that a python script monitoring PV yield could send command to Multiplus via modbus/tcp.

Would this be possible?

charger
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi @Todd Wackford, you make the MultiPlus switch the AC-Out according to certain logic, by using Assistants.

There is no protocol available (such as ModbusTCP or MQTT) that allows you to switch it directly yourself. See also here:

https://community.victronenergy.com/questions/17476/what-is-modbus-tcp-register-addressvalues-for-swit.html

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Chargers.

Additional resources still need to be added for this topic