EasySolar GX connection with LiFePO4 Smart battery

Question

question

Bert Hennephof asked Oct 3, '22

I have a EasySolar II 24/3000/70-32 MPPT 250/70 GX and want to connect a Victron LiFePO4 Smart 25,6V 200Ah.

The EasySolar has BMS-Can (RJ-45) and VE.Bus (RJ-45) and VE.direct (4 pin), but the Smart battery has a male and female circular connector.

Is it not possible to connect directly? Do I need additional BMS device??

EasySolar All-in-One smart lithium

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nickdb answered · Oct 03, 2022 at 02:56 PM

It is rather clearly documented in everything from the spec sheet to the manual..

screenshot-2022-10-03-at-165514.png (209.2 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2022-10-03T15:06:57Z

Bert Hennephof answered · Oct 03, 2022 at 03:06 PM

There are so many options, that it becomes overwhelming.

But I now found the VE.Bus BMS V2, which looks most suitable for my purpose.

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nickdb ♦♦ commented · Oct 03, 2022 at 05:36 PM

Completely. Sign up to professional.victronenergy.com

The video training can make it all less challenging.

You seem to have chosen wisely.

The docs are good, so have a read to become familiar and if you have questions come back here for pointers.

Good luck.

0 ·