question

jimmynz avatar image
jimmynz asked

AC OUT 2 assistants

I have an AC inverter connected to AC-Out-2 on a MultiPlus-ll.

A generator is going to be connected to AC-In-1

I would like to turn AC-Out-2 off when AC-In-1 is active and when Aux-Input-2 is open due to a BMS high battery voltage signal.

AC-Out-2 turns off when AC-In-1 is active but AC-Out-2 will not turn off when Aux-2 (BMS high) is open because it is still being driven to stay on by AC-In-1 not being active.

The idea of this is to avoid using a contactor on the AC inverter.

Can these two be done in combination?

Hopefully makes sense!




AC PV CouplingAssistantsac out 2
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
jimmynz avatar image
jimmynz answered ·

Not possible?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.