question

Juha Tuomala avatar image
Juha Tuomala asked

Landis+Gyr E360 meter data connection to GX?


Any idea how to connect to Landis+Gyr E360 meter and maybe it would be possible to get accurate readings to VenusOS through DLMS or USB?

Manufacturer page gives less information that other meter brands:

https://www.landisgyr.eu/product/landisgyr-e360/


There seems to exist RJ11 - to - USB cable (P1 cable):

https://webshop.cedel.nl/Slimme-meter-kabel-P1-USB-voor-Landis-Gyr-E360

But pulling an usb wire from property border to indoors does not feel feasible.


Some meter brands have RS485 or other screw terminals under the network's seals, I'd like to use the opportunity to get hooked to those before it gets installed. Just in case I need them. Guy doing the installation doesn't know a thing about that.

I see some HomeAssistant people have been wondering the same thing.


Venus OSpower meter
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Juha Tuomala avatar image
Juha Tuomala answered ·
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.