Node red, ideas to force AC2 out on with grid failure

Question

question

nickdb asked Jul 16, '22

Fairly sure the answer is no, I am trying to find a way to force AC2 out on during grid failure via node red dashboard.

The current nodes don't seem to have this ability and the assistant in the multi is cumbersome.

Would be cool to be able to control that relay via node red.

Multiplus-II Node-RED

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2022-07-18T10:53:06Z

biff-trotters answered · Jul 18, 2022 at 10:53 AM

In Assistants, choose programmable relay. Use ACOUT 2 relay. Set to On. Conditions AC input. Drive relay for AC input not available.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2022-07-18T10:54:44Z

biff-trotters answered · Jul 18, 2022 at 10:54 AM

...and likewise, you can drive it OFF for grid available.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.