question

Cracker F avatar image
Cracker F asked

How to show a Grid Tie Inverter in the VRM using a custom energy meter?

I've build a 3 Phase System with 3xMultiplus II, battery and a cerboGX -> all running fine: 1652114761133.png

Now I want to add my Grid Tie Inverter to the VRM (as PV Inverter). I build my own AC energy Meter with an ESP32 (Arduino) a long time ago, so the data is available on the LAN network (MQTT).

1. Is there a way to send this data to a mobus register on the CerboGx? (Could not find it, but maybe I missed it)

2. Can I emulate a pv inverter by implementing a modbus tcp client on my ESP32? Are there some examples anywhere how to do this?

3. Any other Idea how to do this?

Thanks for any hint :)


cerbo gxEnergy MeterModbus TCP
1652114761133.png (44.1 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
pau1phi11ips avatar image
pau1phi11ips answered ·
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.