question

info-8 avatar image
info-8 asked

Multiplus 12 3000 AC out ports

Why are the second AC ports on Multiplus 12 3000 not active?

ac out 2
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

It's in the manual.

With the default configuration the 2nd output will become active around 2 minutes after AC IN is connected.

But you can change the behavior with VE.Config.

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jake avatar image jake commented ·
Hi,

Could you explain, where I can find the setting for the AC-Out-2 in the VE.Config? I couldn't find it.

Thank you ☺️

0 Likes 0 ·
JohnC avatar image JohnC ♦ jake commented ·
@Jake

Look in Assistants > Programmable Relay > Use ACOut 2.

0 Likes 0 ·
jake avatar image
jake answered ·

Ahh, ok. Thank you. I thougt there is a defined setting field/tab. Now I found it :)

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.