Multiplus 12 3000 AC out ports

Question

question

info-8 asked Feb 21, '22

Why are the second AC ports on Multiplus 12 3000 not active?

ac out 2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2022-02-21T18:29:59Z

Matthias Lange - DE answered · Feb 21, 2022 at 06:29 PM

It's in the manual.

With the default configuration the 2nd output will become active around 2 minutes after AC IN is connected.

But you can change the behavior with VE.Config.

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jake commented · Apr 21, 2022 at 06:13 AM

Hi,

Could you explain, where I can find the setting for the AC-Out-2 in the VE.Config? I couldn't find it.

Thank you ☺️

0 ·

JohnC ♦ jake commented · Apr 21, 2022 at 12:18 PM

@Jake

Look in Assistants > Programmable Relay > Use ACOut 2.

0 ·

Answer 2 · 2022-04-21T12:47:47Z

jake answered · Apr 21, 2022 at 12:47 PM

Ahh, ok. Thank you. I thougt there is a defined setting field/tab. Now I found it :)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.