Can not recieved Power Input on Quattro

Question

question

enerhuman asked Feb 4, '22

I have 3 Quattro equipment, 48 amp working as triphasic.

The equipment of a wind generator does not want me to receive load.

These are the values that I put in the Grid

1644000057518.png (31.1 KiB)

1644000106661.png (51.2 KiB)

1644000127383.png (38.4 KiB)

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra ♦ commented · Feb 05, 2022 at 05:09 PM

@Enerhuman

Which input are you using? Ac1 or ac2

Maybe it is a loss of mains thing?

I have not used a wind generator on a Victron, but with a petrol or diesel is cannoften be the LOM detection.

1 ·

enerhuman Alexandra ♦ commented · Feb 05, 2022 at 09:12 PM

AC 1

0 ·

Answer 1 · 2022-02-05T18:21:17Z

Paul B answered · Feb 05, 2022 at 06:21 PM

The incoming power is 130v your voltage disconnect is 140v.is the input going over 140v.also as the re connect is 125 it will stay off

Could also be the Hz if it goes over 65 it will also disconnect

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.