Lithium ion 100/20

Question

question

0863949357 asked Dec 9, '21

Lithium ion 100/20

Hello. I have 2 charge controllers in parallel, one for a lead acid battery, one for lithium ion. While in the Bluetooth network , the lithium ion charger uses the voltage from the lead acid battery sensor. Therefore I suspect it is charging the lithium battery according to this voltage, instead of the lithium battery voltage. Does anyone know if this is just a display issue, or is it a component design oversight?

Lithium Battery

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2021-12-09T15:43:59Z

wkirby answered · Dec 09, 2021 at 03:43 PM

You should not have the chargers in parallel if they are each charging different battery banks. Each battery bank should have its own charger or it's own group of chargers.
It would be best to remove the chargers from the same VE.Smart network and allow each to charge the battery to which it is connected independently.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question