question

dashti1995 avatar image

Unidentified network when connecting my computer to cerbo GX for Grafana dashboard

I have connected my cerbo GX device to my computer in order to setup the Grafana dashboard. however, my computer does not identify the network, and does not show any data on my computer.

I am very new to Modbus TCP and appreciate your help.

Modbus TCPgrafana
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Ulrich avatar image
Ulrich answered ·

Creating your own Grafana panel has the advantage that you can freely design everything here and also display evaluations that are not displayed in the VRM.

However, you have to operate one or more servers of your own for this.

First, the CerboGX must be connected to the VRM portal and upload its data there. You can already see a lot of data here.

If that works, then we can continue at this point.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.