Solar Controller for a WW2 DC Generator?

Question

question

greeneagleking asked Sep 27, '21

Hi all,

I'm looking to use a solar charge controller on an old WW2 generator to charge 12v batteries.

Currently, the generator produces 250watt 115v DC depending upon the RPM of the generator.

The batteries are 2x 6v batteries connected in parallel (12v).

The curveball is the batteries run a 12v motor which pulls anything from 100-200amps (yes I know quite high, I'm working on reducing that).

The question is can I use a Solar Charge Controller of around 20amp charge output which has an input from the DC generator of up to 115v?
Will the high current draw on the batteries damage the controller when it outputs the charge from the generator?

Thanks for the help!

Ben

MPPT Controllers battery charging Generator

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-09-30T04:13:57Z

kevgermany answered · Sep 30, 2021 at 04:13 AM

I don't think you'll get a conclusive answer.

What would worry me is how clean then output from the generator is. If it has voltage spikes I'd guess it will kill the controller.

On the current side, probably ok. Charge controllers are self limiting.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.