question

dirkmuc avatar image
dirkmuc asked

BMV712 in DC Load Monitor and VRM display

Hello everybody,

I cofigured my BMV712 into a DC loadmeter to see my load. additionally I monitor my starter alternator with it. On the Victron connect app and in Venus OS I can see all the values, but in VRM nothing, just -0,01V which is not coming from the BMV712. See pictures attached.

Do I do something wrong or is it a VRM issue? I use 2.80~16 large 21 on a RPi4.

Kind regards

Dirk

gleichstromlast-venus-os.jpg

gleichstromlast-vrm.jpg


VRMVenus OS
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
bathnm avatar image
bathnm answered Ā·

I have the same. This is early functionality and I suspect the work to link the data from VenusOS in VRM for DC load is not yet in place.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

harold avatar image
harold answered Ā·

You are on a beta version anyway!

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.