question

xotet avatar image
xotet asked

Lithium battery bank (VE Modules) and Multiplus II

I know this question is bordering not relevant for Victron, but I may not be alone with this issue - and there are so many skilled techies here so I hope you can forgive me.

I just purchased 5x VE modules Samsung SDI 2,08Kwh, modules are configured in 12S cells 42Ah, so the voltage range is between 38,4v-49,2v.

I want to build a bank around 10kWh capacity, so the config 12S5P.

I have a Multiplus II 48/3000 wich I want to use, so the question is the voltage range suitable for the charger section of the Multiplus?

Attached an image of one module

whatsapp-image-2021-04-10-at-095050-2.jpeg

Thanks in advance




Multiplus-IILithium BatteryBMS
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

1618041634656.png (41.0 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

xotet avatar image
xotet answered ·

Thanks for your answer,

The individual 42Ah cells are welded together and I suspect messing with that is going to cause more pain and cost more than I would like.

This is why I suggest to give it a try with 12S5P

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources